The cable tray cold rolling forming machine adopts full-automatic, PLC control, which is easy and convenient to operate; it adopts pre-punching and re-forming mode, and the production speed is high. Different specifications are completed by changing the die. The roll bending machine adopts a combination adjustable type, and a set of rolls completes all the specifications of the bridge products. The specification changes are completed by adjusting the opening and rolling of the forming machine.
The cable tray cold rolling forming machine uses a double cantilever gear transmission, and the machine's production width can be continuously adjusted to change the width and height. The main engine consists of AC motor, reducer, high-precision lining guide, left and right gearbox, level adjustment system and rolling die. The base and the transmission adopt a welded structure and are subjected to hardness treatment. The material of the roll is 45# steel.
The roll forming process of the cable tray cold rolling forming machine is manufactured by a special cold rolling forming scheme; the process is also subjected to finite element analysis and inspection. The structure of the rolls is combined, so the difference in line speed and the resistance of the roll forming is small. Easy to feed. Ensure the accuracy and stability of roll forming.
Before cleaning the cable tray cold roll forming machine, the user's first job is to turn off the switch and cut off the power; after turning off the power, the worker can use a dry rag to wipe the parts on the molding machine, especially the roller part, from start to finish. For places where there is more oil in the molding machine, the worker can dilute the detergent with warm water, then wipe it with a rag.