Before using the hydraulic cutting C / Z channel Pur strip forming machine, the user needs to check whether the connection is secure in advance, whether the mounting bolts and nuts are tightened, and the lubricating oil should be added to the left and right chassis to start the machine for commissioning. Usually, the empty car trial run is first carried out and its operating state is checked, whether there is vibration, noise, whether the oil window comes to the oil, whether the movement of each component is coordinated or not.
The main forming power of the hydraulic cutting C / Z channel Pur strip forming machine is hydraulically driven, because it can achieve the advantage of short-term emergency stop and short braking distance, so the board speed is relatively fast. Special attention must be paid during the use of the equipment. In the range of 5 meters before and after feeding or discharging, the surrounding personnel should not be close, pay attention to safety and prevent accidental personal injury.
The color plate produced by the hydraulic cutting C / Z channel Pur strip forming machine is flat and beautiful, uniform in paint, high in strength and durable. It is widely used in industrial and civil buildings, such as factory buildings, warehouses, stadiums, exhibition halls, theaters, etc. And the wall.http://www.bangweimachine.com/