The automatic PLC controls the rolls in the spine roll forming machine, which is an important part of its design and manufacturing characteristics. Each pass should be subjected to an average force so as to be able to wear and balance, thereby extending the service life of the rolls. The automatic PLC controls the roll in the spine roll forming machine to use C12MoV material, because this material has good wear resistance, but pay attention to the hardness and strength, so it must be handled well.
The automatic PLC controls the upper and lower rolls or horizontal wheels of the spine roll forming machine, and effective tube bundle protection should be performed. The automatic PLC control ridge roll forming machine should take into account the rolling stability during the rolling process. For example, the gap between the rollers can be kept consistent during assembly; and the guiding slant can be set before the material bites.
The automatic PLC control spine roll forming machine is designed to be balanced in order to be able to process accurately, so as to avoid bending distortion during the production process. Under the condition of automatic PLC control of the running condition of the spine roll forming machine and its technical specifications, the management and maintenance work is done conscientiously, and the professional management method is implemented to realize the standardization of equipment management work.