Categories
Contact Us
Add: No.586, Xizhang Road, Gushan Town,Jiangyin District, Wuxi City, Jiangsu Province.
Tel: +86-510-86958108
Mob: +8615251570517
Fax:+86-510-86958108
E-mail:jybw@jybangwei.com
Dong zhen wei:+8615995369211
Knowledge
Home > Knowledge > Content
Color Steel roof tile making machine operation skills
Jan 28, 2019

In order to ensure production efficiency and equipment safety, the color steel roofing tile manufacturing machine should pay more attention to the operation process. In addition to the vibration force generated by the weight of the pressing machine itself and the vibration force generated during operation, it should also be absorbed and isolated due to work. Vibration and prevent resonance from occurring.

 

For this reason, the basic play was carefully checked before the installation of the color steel roof tile manufacturing machine, and the problem was found to be dealt with in advance. The basic inspection of the color steel roofing tile manufacturing machine includes the basic dimensions, the level of the base surface, the center line, the elevation, the center distance of the anchor bolt holes, and whether it meets the requirements of the design and construction specifications.

 

For the smooth foundation surface in the secondary grouting area, many small round pits are to be drilled with steel brazing, so that when the second grouting is made, the newly poured concrete and the original concrete surface of the anchor bolt hole or the original base surface are firmly joined. Guarantee the quality of the grout. In the process of inspecting the color steel tile forming machine, it is found that the unqualified place should be processed in time.

 

Under normal circumstances, the foundation is most likely to produce elevations that do not meet the requirements of the elevation and the position of the anchor bolts. These problems should be dealt with in a timely manner. If there are individual deviations of the embedded anchor bolts, the bolts can be polished to the correct position by gas welding, and when the deviation is too large, the larger bolts can be cut to a certain depth around them and then cut. It is required to weld a section of the lap joint and use reinforcement reinforcement measures.


  • Newsletter
  • Categories
  • Contact Us
    Add: No.586, Xizhang Road, Gushan Town,Jiangyin District, Wuxi City, Jiangsu Province.
    Tel: +86-510-86958108
    Mob: +8615251570517
    Fax:+86-510-86958108
    E-mail:jybw@jybangwei.com
    Dong zhen wei:+8615995369211
  • QR Code
  • Copyright © Jiangyin Bangwei Machinery Co.,Ltd All Rights Reserved.