The cable tray roll forming machine can be used to produce cable trays. Different specifications are completed by replacing the die. The roll bending machine adopts a combination of adjustable and one set of rolls to complete all specifications of the bridge products. The specification changes are completed by adjusting the forming machine opening and rolling. Therefore, the type and replacement method of the cable tray roll forming machine, as well as the number of replacements, have a reference for the design of the roll. Before designing a roll, it is necessary to comprehensively consider a variety of factors before making a design.
When the cable tray roll forming machine is installed, it is generally locked by screws on the wall plate. Therefore, this type of machine is generally used in the production of special profiles, the use of machines that do not need to change the rolls, making it more convenient in production, the designer does not have to consider the requirements of roll replacement.
If it is versatile, it is generally used to produce profiles with the same cross-section and different widths, which are widened by the positioning sleeve. The rolls are generally not disassembled, but the sleeves are used to widen the rolls. . When producing different profiles, another set of roll modules is replaced in groups and fixed by means of locating pins. This method is particularly convenient for the need to frequently change the production of different profiles, the replacement time is very fast, no need to move to the roll, no need to re-commission.